Peerless Products are proud to produce its own brand in High Quality Rotary Screw Compressors (HQ-Air). We have always been involved with screw compressors but now have designed our own to suit the demands of the Australian market.

With the Peerless Rotary Screw Compressors, we test each model prior to being sent out from our factory for a minimum of 4 hours. The quality assurance inspector then dates and signs the service label notifying of when the next service is required.

Services on Screw compressors are based on hourly usage. The first inspection is in 500 hours of use, this is like a new car inspection. This is to make sure that all seals, valves, filters and oil condition is all working correctly. From there the services are based on the following;

2000 Hours
4000 Hours
6000 Hours
8000 Hours and so on.

The services are also based on the environmental conditions – if it is in a fairly dirty environment, services maybe at sooner intervals.

Most sites where an air compressor is installed you may have your own maintenance team, if this is so, yes you can service your own air compressor. This does not void your warranty if serviced correctly under the manufacture guidelines.

Please note: Power supply is very important when selecting an air compressor, along with selecting the right one for the application. Please talk to your local Peerless representative.

Base Mount (No tanks)
The base mount option is a great option if you're limited on space or if you already have an air receiver. Don't forget, if you're upgrading from an older piston model, you may be able to utilise the tank.

Full Feature - Screw, dryer & tank
The Full Feature models is the ultimate space saver with the screw component and air dryer situated on top of a 200L air receiver in order to properly utilise valuable floor space.

Key things to check:

• Check the positioning of your air compressor – no direct sunlight, efficient air flow, non-dusty environment, cool if required.
• Change the oil -  if discoloured change immediately, this is the life line of your air compressor.
• Change the air intake filter - This will keep the pump working efficiently and keep the oil clean protecting your bearings or Air-end.
• Check your air fittings – Air leaks create increased duty cycles making your air compressor work harder, creating heat.
• Inspect your V belts – Make sure you have the right tension and no wear and tear.
• Correct ventilation around the air compressor – all air compressors need air flow.
• Check all your inline filters – restricted or blocked filters lower your efficiency to work by reducing your air flow – these work harder in hotter months.
• Maintain your Dryer – check or re-gas your coolant make sure correct amount of air flow going through.

Peerless Products are a professional wholesaler that distribute their products through a dealer network. They provide you local expert advice and support backed by Peerless Products. We pride ourselves on aftermarket support and service partnered with our platinum dealers. This is so you have a physical "go to" for any support required. Having that local touch of a "go to" that support you and your business enables that extra bit of confidence when purchasing a Peerless branded air compressor.

Technical Specifications

• HP/kW: 20HP/15kw
• Free Air Delivery (LPM)/CFM: 2400 / 84.8
• PSI/Bar: 116PSI/ 10 Bar
• Tank Capacity: 500L
• Dimensions (mm): 1090L x 710W x 1100H
• Weight (kg): 350kg
• Discharge temp (°C): Ambient temp +15°C 
• Driving type: Belt Drive
• dBa (+/-2): 70
• Outlet thread: 1" BSP
• Electricity: 415V
• Amps draw (Full load): 27  

Dryer Specifications

• Compressor HP: 3/4HP
• Working Pressure: Min. 6 Bar, Max. 10 Bar
• LPM: 2000
• m3/h: 120
• CFM: 70.6
• Power Plus: 10A